Project Supervisory

(59) Mehrdad Omidi-ghallemohamadi, PhD, Synthesis and characterization of epoxy thermosets possessing graphene oxide- and silica-unloaded and loaded oxyethylene units; epoxy networks having imide linkages as well as new nanoparticle/nanolayer-loaded thermoplastic and thermoset polyurethanes , April 2022.

(58) Abolfazl Khanzadeh, MSc, Amphiphilic H-shaped miktoarm block polymers consisting of PEG-PCL prepared from a combination of ring-opening polymerization and click chemistry, December 2021.

(57) Aziz Ahmadi Khaneghah, PhD, Synthesis and investigation of mechanical and thermal behavior new nanocomposites of epoxy-matrix and polystyrene-matrix possessing ether linkages, December 2021.

(56) Ali Piri khelkanlo, MSc, Synthesis and characterization of polymethyl acrylate networks with oxyethylene crosslinks having silica nanoparticles via surface-initiated atom transfer radical polymerization technique, December 2021.

(55) Mehrshad Hasani, MSc, Synthesis of polystyrene thermosets with oxyehtylene crosslinks via atom transfer radical polymerization initiated at the surface of SiO2 nanoparticles, October 2021.

(54) Sajjad Ahmadi, MSc, Synthesis and characterization of magnetic polystyrene networks via nanoparticle surface initiated, September 2021.

(53) Mahleghah Dadipour-sarani, MSc, Synthesis of PEG-based hydrogels containing triazine nuclei through Click chemistry, February 2021.

(52) Faezeh Aminian, MSc, H-shaped polyester (ether-esters)s with disulfide bonds prepared by ring-opening polymerization and click chemistry, February 2021.

(51) Raheleh Gilani, MSc, H-shaped polyester (ether-esters)s with disulfide bonds prepared by ring-opening polymerization and click chemistry, February 2021.

(50) Ahmad Haji Tabar Firoozjaei, MSc, H-shaped polyester (ether-esters)s with disulfide bonds prepared by ring-opening polymerization and click chemistry, February 2021.

(49) Elham Naeemikhah, PhD, Epoxy-matrix and styrene-matrix nanocomposites possessing ether linkages: Synthesis and characterization, June 2020.

(48) Navid Damghani, MSc, Probing curation of DGEBA epoxy resin with combination of isophorone diamine and Jeffamine, February 2020.

(47) Iman Heydari, MSc, Probing curation of bisphenol A diglycidyl ether/polyethylene glycol diglycidyl ether binary epoxy resin by diaminodiphenylsulfone curing agent, February 2020.

(46) Reza Izadi, MSc,  Preparation of polyurethane hydrogels based on PEG/PCL in the presence of graphene oxide nanoplatelets, February 2019.

(45) Morteza Aminian, MSc, Preparation of polyurethane hydrogels based on polyethylene glycol and polycaprolactone in the presence of silica nanoparticles, February 2019.

(44) Zahra Ramezani, MSc, Synthesis of amphiphilic ABAB type miktoarm star copolymers based on PCL and mPEG, February 2019.

(43) Kolsoum Panahandehzadeh, MSc, Synthesis and characterization of PEG-g-PCL copolymers by combination of ROP and ”Click” chemistry, February 2019.

(42) Fariba Jafari-soghieh, PhD, Synthesis and properties of new epoxy composites loaded by modified silica and magnetite nanoparticles, December 2018.

(41) Athar Heidari, MSc, PEG-crosslinked magnetic PS chains: Synthesis by ATRP Technique, February 2018.

(40) Maryam Karimzadeh, PhD, Synthesis and characterization of new polymer-matrix nanocomposites: Polyurethane/magnetite and polyimide/silica, February 2018.

(39) Saeed Salehi, MSc, PEG-crosslinked PS chains loaded by silica NP’s: synthesis by ATRP technique, February 2018.

(38) Sara Khosravi ardakani, MSc, PEO-based epoxy resins and hardeners to fabricate GO-loaded nanocomposite films, February 2018.

(37) Zeinab Shamsi jamkhaneh, MSc, Fabrication of silica-loaded nanocomposite films by participation of PTMO-based epoxy resins and hardeners, February 2018.

(36) Elahe sadat Eslampanah seyedi, MSc, Silica Nanoparticles Surface Modified by Flexible Organo-Macrochains for Loading into Poly(4,4′-oxydiphenylene-pyromellitimide), February 2017.

(35) Mahsa Fonoudi, MSc, Silica-coated Magnetite Nanoparticles Organically Modified with PTMO for loading into Polyuratane Elastomers, February 2017.

(34) Elmira Pajoohi alamooti, MSc, Surface Modification of Silica Nanoparticles by a Polyether Chain, and Their Covalent Loading in Epoxy Networks, February 2017.

(33) Mojtaba Yazdi, PhD, Synthesis and Properties of Polymer-matrix Nanocomposites: Polyurethane/Carbon Nanotubes (PU/CNT), Polyurethane/Clay (PU/Clay), Polyaniline/Silver (PANI/Ag), and Polyimide/Silica (PI/SiO2), July 2016.

(32) Khaledeh Malekshahinezhad, PhD, Synthesis and Characterization of Polypyrrole/Palladium (PPy/Pd), Epoxy/Titanium dioxide (Epoxy/TiO2), and Polyurethane/Titanium dioxide (PU/TiO2) Nanocomposites, September 2015.

(31) Fariba Asgari, MSc, Loading of Biosynthesized Silver Nanoparticles Using Melissa Leaves Extract into Polyaniline Matrix Prepared by Interfacial Polymerization: Synthesis and Antibacterial Behavior of PANI/Ag Nanocomposites, September 2015.

(30) Nikoo Atefi, MSc, Polymer-based Nanocomposites Consisting of Polyurethane Loaded with Functionalized Magnetite Nanoparticles, September 2015.

(29) Adel Jozjalalian, MSc, Intercalation of Montmorillonite Nanolayers by Quaternary Ammonium-Capped Poly(tetramethylene oxide) for Loading into Oil-based Alkyd Resin, September 2015.

(28) Aziz Ahmadi Khaneghah, MSc, Synthesis and thermo–mechanical properties of polyurethane/clay nanocomposites modified by QAS- capped PTMO, February 2015.

(27) Sima Fatollah-nadjarbashi, MSc, Improving thermo-mechanical properties of epoxy networks using nanoclay modified with QAS-capped PTMO, February 2015.

(26) Sahel Moradi Azani, MSc, Synthesis and antibacterial activity of polyurethane coating in the presence of phytosynthesised silver nanoparticles, September 2014.

(25) Atefeh mohammad khani, MSc, Phytosynthesized Silver Nanoparticles for Preparing Epoxy/Ag Nanocomposites: Probing Thermal and Antibacterial Behaviors, September 2014.

(24) Seyed Kazem Amirkhalili, MSc, Probing effect of surface-modified TiO2 nanoparticles on optical and thermal properties of poly(oxydiphenylenepyromellitimide), September 2013.

(23) Shiva Azadeh, MSc, Investigation of optical and thermal properties of polyurethane-based nanocomposites containing surface-modified silica nanoparticles, September 2013.

(22) Saeede Farshad, MSc, Probing effect of surface-modified silica nanoparticles on optical and thermal behaviors of Kapton, September 2013.

(21) Mina Alimohammadi, MSc, Synthesis and characterization of pure polyurethane and polyurethane/TiO2 nanocomposites with surface modified TiO2, September 2013.

(20) Davoud Yousefzadeh, MSc, Poly(3,4-ethylenedioxythiophene)/Ag nanocomposite chemically-prepared in the presence of sodium dodecylsulfate emulsifier in silver nanofluid, November 2012.

(19) Elaheh Mohammadi Hacherood, MSc, Inverted Emulsion Technique in the Preparation of Poly(3-methylthiophene)/Titanium dioxide Nanocomposite, September 2012.

(18) Hossein Moaref, MSc, Synthesis and characterization of pure poly(3,4-ethylenedioxythiophene) and poly(3,4-ethylenedioxythiophene)/Ag nanocomposite in binary organic solvents, September 2012.

(17) Ahmad Alinia pouri, MSc, Synthesis of Polyaniline/Silver Nanocomposites via Reduction of Silver nitrate, and Their Characterization, September 2011.

(16) Fatemeh Saki, MSc, Synthesis and Characterization of Poly(3-methylthiophene)/TiO2 Nanocomposites, September 2011.

(15) Marziyeh Barzegar, MSc, Synthesis and Characterization of PANI and PANI/Ag Nanocomposites; PPy and PPy/Ag Nanocomposites, September 2011.

(14) Roghayeh Samia, MSc, Preparation of Poly(3-methyl thiophene) in Chloroform/Acetonitrile Binary Solvents; Preparation of Poly(3-methyl thiophene) Hybrid with Silver Nanoparticles, September 2011.

(13) Sepideh Mohammadparast Delshad, MSc, New Naphthalene-based Fluorinated Aromatic Poly(amide-imide)s: Synthesis and Properties, September 2010.

(12) Narges Sefid Jirandehi, MSc, New Naphthalene-based Fluorinated Aromatic Poly(ether-imide)s: synthesis and properties, September 2010.

(11) Najma Mohammadzadeh bash saroogh, MSc, New Fluorinated Poly(amide-imide)s Based on Twisted Binaphthyl Rings: Synthesis and Properties, September 2010.

(10) Azam Abedini Pozveh, MSc, Synthesis and properties of new organosoluble and thermally stable poly(amide–ether-imide)s, September 2010.

(9) Mahdiyeh Hosseinpour, MSc, New Fluorinated Poly(ether-imide)s Based-on Twisted Binaphthyl Rings: Organosolubility, Thin Film Optical Behavior, and Thermal Properties, September 2010.

(8) Mohsen Sedaghatdoost, MSc, Synthesis and Characterization of New Fluorinated Aromatic Polyamides Containing Flexible Ether Linkages, September 2009.

(7) Hamid Sadeghi-abendansari, MSc, New Wholly Aromatic Poly(ether-imide)s: Synthesis, Characterization and Properties, February 2009.

(6) Parvaneh Boland, MSc, Synthesis and Characterization of Novel Wholly Aromatic Polyimides with Bulky Biphenylene Ether Linkages, September 2008.

(5) Saeed Khosravi-borna, MSc, Synthesis and Characterization of Novel Wholly Aromatic Polyamides with Bulky Biphenylene Ether Linkages, July 2008.

(4) Sara Mohammadian, MSc, Preparation and Investigation of Physical and Mechanical Properties, Thermal Stability, and Degradation of High Impact Polystyrene-Poly(phenylene oxide) Alloys by Chemical and Physical Methods, February 2008.

(3) Mostafa Ghorbani Kelishom, MSc, Synthesis and Characterization of New Aromatic Poly(amide-imide)s and Poly(ester-imide)s, September 2007.

(2) Mehrtaj Amraei, MSc, Synthesis and Characterization of New Wholly Aromatic Poly(urea-imide)s Derived from 4-p-Biphenyl-2,6-bis(4-trimellitimidophenyl) Pyridine, February 2007.

(1) Sara Haghighat Esfahani, MSc, Synthesis, Characterization, and Properties of New Aromatic Poly(urea-imide)s, February 2007.